Free Cisco 200-301 Practice Questions 2026 | Cisco Certified Network Associate

What is the purpose of the ip address dhcp command?

A. to configure an Interface as a DHCP server

B. to configure an interface as a DHCP helper

C. to configure an interface as a DHCP relay

D. to configure an interface as a DHCP client

Refer to the exhibit.

A. Option A

B. Option B

C. Option C

D. Option D

Refer to the exhibit.

Site A was recently connected to site B over a new single-mode fiber path. Users at site A report Intermittent connectivity Issues with applications hosted at site B. What is the reason for the problem?

A. Heavy usage is causing high latency.

B. An incorrect type of transceiver has been inserted into a device on the link.

C. physical network errors are being transmitted between the two sites.

D. The wrong cable type was used to make the connection.

A network engineer is Installing an IPv6-only capable device. The client has requested that the device IP address be reachable only from the internal network. Which type of IPv6 address must the engineer assign?

A. unique local address

B. link-local address

C. aggregatable global address

D. IPv4-compatible IPv6 address

Refer to the exhibit

The administrator must configure a floating sialic default route that points to
2001:db8:1234:2::1 and replaces the current default route only if it fails. Which command must the engineer configure on the CPE?

A. ipv6 route ::/0 2001:db8:1234:2::1 3

B. ipv6 route ::/128 2001 :db8:1234:2::1 3

C. ipv6 route ::/0 2001:db8:1234:2::1 1

D. ipv6 route ::/0 2001:db8:1234:2::1 2

An engineer is configuring SSH version 2 exclusively on the R1 router. What is the minimum configuration required to permit remote management using the cryptographic protocol?

A. Option A

B. Option B

C. Option C

D. Option D

E.

What is one reason to implement LAG on a Cisco WLC?

A. to increase security and encrypt management frames

B. to provide link redundancy and load balancing

C. to allow for stateful and link-state failover

D. to allow for stateful and link-state failover

Drag and drop the functions of SNMP fault-management from the left onto the definitions on the right.

A network engineer is replacing the switches that belong to a managed-services client with new Cisco Catalyst switches. The new switches will be configured for updated security standards, including replacing Telnet services with encrypted connections and doubling the modulus size from 1024. Which two commands must the engineer configure on the new switches? (Choose two.)

A. crypto key generate rsa general-keys modulus 1024

B. transport input all

C. crypto key generate rsa usage-keys

D. crypto key generate rsa modulus 2048

E. transport Input ssh

Drag and drop the TCP or UDP details from the left onto their corresponding protocols on the right.