Free Cisco 350-801 Practice Questions 2026 | Implementing Cisco Collaboration Core Technologies (350-801 CLCOR)

Users want their mobile phones to be able to access their cisco unity connection mailboxes
with only having to enter their voicemail pin at the login prompt calling pilot number where
should an engineer configure this feature?

A.

message settings

B.

greetings

C.

alternate extensions

D.

transfer rules

Which configuration on Cisco Unified Communication Manager is required for SIP MWI to
work?

A.

The line partition must be inside the inbound CSS assigned to the CUC SIP trunk.

B.

Assign a MWI extension on the mailbox

C.

The line partition must be inside the rerouting CSS assigned to the Cisco assigned to
the Cisco unity connection SIP trunk.

D.

Set the “Enable message waiting indicator” on the port group.

Which DSCP class selector is necessary to mark scavenger traffic?

A.

CS1

B.

AF21

C.

AF11

D.

CS2

Which access control group is required on an end user to allow Jabber to do deskphone
mode?

A.

Standard CTI Enabled

B.

Standard CTI Allow Reception of SRTP key Material

C.

Allow control of device from CTI

D.

Standard CTI Secure Connection

Which two conditions must a user meet to provision a new device using the selfprovisioning
feature? (Choose two.)

A.

The user must have the appropriate universal device template linked to the linked to the
user profile.

B.

The user must have at least one user device profile assigned.

C.

The user must have a primary extension

D.

At least DNs must be assigned to the user device

E.

The user must be part of “standard CCM Super User”.

A customer wants to deploy Cisco Jabber Phone Mode with contacts. Which two
configurations are needed to accomplish this goal? (Choose two)

A.

Add the Application Client Users role to the Cisco UCM end users

B.

Remove the IM and Presence servers from the Cisco UCM service profile.

C.

Disable Instant Messaging on IM and Presence

D.

Import Contacts.xml into Jabber.

E.

Enable Cisco UCM end-users for IM and Presence.

An administrator executes the debug isdn q931 command while debugging a failed call.
After a test call is placed, the logs return a disconnect cause code of 1. What is the cause
of this problem?

A.

The destination number rejects the call

B.

The destination number is busy

C.

The media resource is unavailable

D.

The dialed number is not assigned to an endpoint

After an engineer implements the FAC and CMC features together, users report that calls
take almost one minute to complete and that they occasionally hear the reorder tone Which
two actions address this issue? (Choose two.)

A.

Advise the user to press the "#" button after dialling the FAC and CMC codes

B.

Change the code if the problem persists i/i-Advise the user to hang up and try again

C.

Adjust the T302 timer from the default of 15 seconds to 5 seconds to shorten the interdigit timer

D.

Do not wait for the tones immediately dial the FAC and CMC

Which Cisco Unity Connection handler plays a greeting that announces the option to dial a user extension by default?

A.

the Goodbye call handler

B.

the Operator call handler

C.

the Directory handler

D.

the Interview handler

Which action is required for a firewall configuration on a Mobile and Remote Access through Cisco Expressway deployment?

A.

The traversal zone on Expressway-C points to Expressway-E through the peer address
field on the traversal zone, which specifies the Expressway-E server address. For dual NIC
deployments, set the Expressway-E address using an FQDN that resolves the IP address
of the internal interface

B.

The internal firewall must allow these inbound and outbound connections between
Expressway-C and Expressway-E. SIP: HTTPS (tunnelled
overSSH between C and E): TCP 2222; TCP 7001; Traversal Media: UDP 2776 to 2777 (or
36000 to 36011 for large VM/appliance): XMPP: TCP 7400.

C.

The external firewall must allow these inbound connections to Expressway: SIP: TCP
5061; HTTPS: TCP 8443: XMPP: TCP 5222; Media: UDP 36002 to 59999.

D.

Do not use a shared address for Expressway-E and Expressway-C, as the firewall
cannot distinguish between them If static NAT for IP addressing on Expressway-E is used,
ensure that any NAT operation on Expressway-C does not resolve the same traffic IP
address Shared NAT is not supported.