Free Cisco 350-801 Practice Questions 2026 | Implementing Cisco Collaboration Core Technologies (350-801 CLCOR)

What is the major difference between the two possible Cisco IM and presence highavailability
modes?

A.

Balanced mode provides user load balancing and user failover only for manually
generated failovers. Active/standby made provides an unconfigured standby node in the
event of an outage, but it does not provide load balancing.

B.

Balanced mode provides user load balancing and user failover in the event of an outage. Active/standby mode provides an always on standby node in the event of an
outage, but it does not provide load balancing.

C.

Balanced mode does not provide user load balancing, but it provides user failover in the
event of an outage. Active/standby mode provides an always on standby node in the event
of an outage, but is does not provide load balancing.

D.

Balanced mode provides user load failover in the event of an outage. Active/standby
mode provides an always on standby node in the event of an outage, and is also provides
load balancing.

An administrator is integrating a Cisco Unity Express module to a Cisco UCME system A
test call is placed to the Cisco Unity Express pilot number, but the administrator receives a
busy signal. The dial-peer is configured as follows:

How is this issue resolved?

 

A.

The dial-peer needs to be reconfigured to support the G 711 voice codec.

B.

The dial-peer needs to be reconfigured to support vad.

C.

The destination pattern needs to be changed to match the dialed number of 4100.

D.

The dial-peer needs to be reconfigured to support H 323 instead of SIP.

A Cisco Unity Connection Administrator must set a voice mailbox so that is can be
accessed form a secondary device. Which configuration on the voice mailbox makes this
change?

A.

Mobile User

B.

Alternate Names

C.

Attempt Forward routing rule

D.

Alternate Extensions

Which two configuration elements are part of the Cisco Unified Communications Manager
toll-fraud prevention? (Choose two.)

A.

SIP trunk security profile.

B.

Partition

C.

Calling search space

D.

SUBSCRIBE calling search space

E.

Feature control policy

Refer to the exhibit.

Calls to Cisco Unity Connection are failing across Cisco Unified Border Element when
callers try to select a menu prompt. Why is this happening and how is it fixed?

A.

Cisco Unified Border Element is not sending any support for DTMF. DTMF configuration
must be added to the appropriate dial peer.

B.

The Cisco Unity Connection Call Handler is configured for a -Release to Switch" transfer
type. Transfers must be disabled for the Cisco Unity Connection Call Handler.

C.

Cisco Unity Connection is configured on G.729 only. Cisco Unity Connection must be
reconfigured to support iLBC.

D.

Cisco Unified Border Element is sending the incorrect media IP address. The IP address
of the loopback interface must be advertised in the SDP.

Which statement about Cisco Unified Communications Manager and Cisco IM and
Presence backups is true?

A.

Backups are saved as unencrypled.tar files.

B.

Backups should be scheduled during off-peak hours to avoid system performance
issues.

C.

Backups are saved as .tar files and encrypted using the web administrator account.

D.

Backups are not needed for subscriber Cisco Unified Communications Manager and
Cisco IM and Presence servers.

Which action is required if an engineer wants to have Cisco Unified Communications
Manager configuration for an MGCP gateway?

A.

Upload the custom configuration in the TFTP server in cisco Unified CM.

B.

Configure the Cisco Unified CM’s IP in voice service VoIP.

C.

Apply the ccm-manager configuration commands to the gateway

D.

From Cisco Unified CM >Device > Gateway > Add gateway, check the autoconfiguration
check box.

Which attribute contains an XMPP stanza?

A.

iq

B.

message

C.

type

D.

presence

Which type of greeting in the Call Handler configuration in Cisco Unity Connection
overtimes all other greetings?

A.

holidays

B.

supervisory

C.

alternate

D.

priority

Which issue can occur if QoS is not Deployed on a Cisco Collaboration architecture across
the WAN?

A.

Unexpected shut-down on Cisco Unified Communications Manager

B.

Packet fragmentation

C.

403 Forbidden errors on SIP calls

D.

Excessive jitter