• 4.9/5.0
  • 1197 Questions
  • Updated on: 25-May-2026
  • Cisco Certified Network Associate
  • 211975 Prepared

Free Cisco 200-301 Practice Questions 2026 | Cisco Certified Network Associate


Topic 1: Exam Pool A

   

desc about topic

what occurs to frames during the process of frame flooding?

A. Frames are sent to every port on the switch in the same VLAN except from the originating port

B. Frames are sent to every port on the switch that has a matching entry in the MAC address table.

C. Frames are sent to all ports, including those that are assigned to other VLANs.

D. Frames are sent to every port on the switch in the same VLAN.

A.   Frames are sent to every port on the switch in the same VLAN except from the originating port

Drag and drop the 802.11 wireless standards from the left onto the matching statements on the right 

Which function is performed by the collapsed core layer in a two-tier architecture?

A. enforcing routing policies

B. marking interesting traffic for data polices

C. attaching users to the edge of thea network

D. applying security policies

A.   enforcing routing policies

Which type of attack can be mitigated by dynamic ARP inspection?

A. worm

B. malware

C. DDoS

D. man-in-the-middle

D.   man-in-the-middle

How is the native VLAN secured in a network?

A. separate from other VLANs within the administrative domain

B. give it a value in the private VLAN range

C. assign it as VLAN 1

D. configure it as a different VLAN ID on each end of the link

A.   separate from other VLANs within the administrative domain

Which network plane is centralized and manages routing decisions?

A. policy plane

B. management plane

C. control plane

D. data plane

C.   control plane

Refer to the exhibit.

What does router R1 use as its OSPF router-ID?

A. 10.10.1.10

B. 10.10.10.20

C. 172.16.15.10

D. 192.168.0.1

C.   172.16.15.10

Explanation:

OSPF uses the following criteria to select the router ID:1. Manual configuration of the router ID (via the “router-id x.x.x.x” command under OSPF router configuration mode).2. Highest IP address on a loopback interface.3. Highest IP address on a non-loopback and active (no shutdown) interface.

Refer to the exhibit. Router R1 is running three different routing protocols. Which route characteristic is used by the router to forward the packet that it receives for destination IP 172.16.32.1?

A. longest prefix

B. metric

C. cost

D. administrative distance

A.   longest prefix

Explanation:

https://learningnetwork.cisco.com/s/question/0D53i00000KszSlCAJ/administrative- distance-vs-longest-match-rule

What Is a syslog facility?

A. Host that is configured for the system to send log messages

B. password that authenticates a Network Management System to receive log messages

C. group of log messages associated with the configured severity level

D. set of values that represent the processes that can generate a log message

C.   group of log messages associated with the configured severity level

Explanation:

Cisco Community – Difference between logging level and logging facility Post by ahmednaas “The logging facility command basically tells the syslog server where to put the log message. You configure the syslog server with something like: local7.debug /var/adm/local7.log Now, when you use the “logging facility local7” on your device, all messages with severity “debug” or greater should be saved in /var/adm/local7.log.”
Example: on a switch, any process (CDP, SNMP, etc.) can generate a log message. On a syslog server, the logging facility is the place where all received messages with the same priority level are stored.

Drag and drop the Cisco Wireless LAN Controller security settings from the left onto the correct security mechanism categories on the right.


Page 24 out of 120 Pages
PreviousNext
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748