• 4.9/5.0
  • 1197 Questions
  • Updated on: 25-May-2026
  • Cisco Certified Network Associate
  • 211975 Prepared

Free Cisco 200-301 Practice Questions 2026 | Cisco Certified Network Associate


Topic 2, Exam B

What is a similarly between 1000BASE-LX and 1000BASE-T standards?

A. Both use the same data-link header and trailer formats

B. Both cable types support LP connectors

C. Both cable types support Rj-45 connectors

D. Both support up to 550 meters between nodes

O.

A.   Both use the same data-link header and trailer formats

Explanation:

“In computer networking, Gigabit Ethernet (GbE or 1 GigE) is the term applied to transmitting Ethernet frames at a rate of a gigabit per second.” Both standards use Ethernet framing (same headers and trailers)

An engineer configures interface Gi1/0 on the company PE router to connect to an ISP Neighbor discovery is disabled

Which action is necessary to complete the configuration if the ISP uses third-party network devices?

A. Enable LLDP globally

B. Disable autonegotiation

C. Disable Cisco Discovery Protocol on the interface

D. Enable LLDP-MED on the ISP device

D.   Enable LLDP-MED on the ISP device

Refer to the exhibit.


Which change to the configuration on Switch?
allows the two switches to establish an GtherChannel?

A. Change the protocol to EtherChannel mode on.

B. Change the LACP mode to active

C. Change the LACP mode to desirable

D. Change the protocol to PAqP and use auto mode

B.   Change the LACP mode to active

When deploying syslog, which severity level logs informational message?

A. 0

B. 2

C. 4

D. 6

D.   6

Explanation:
https://en.wikipedia.org/wiki/Syslog

Refer to the exhibit.

Based on the LACP neighbor status, in which mode is the SW1 port channel configured?

A. passive

B. mode on

C. auto

D. active

O.

D.   active

Explanation:

From the neighbor status, we notice the “Flags” are SP. “P” here means the neighbor is in Passive mode.In order to create an Etherchannel interface, the (local) SW1 ports should be in Active mode.Moreover, the “Port State” in the exhibit is “0x3c” (which equals to “00111100 in binary format).Bit 3 is “1” which means the ports are synchronizing - > the ports are working so the local ports should be in Active mode.

Which two values or settings must be entered when configuring a new WLAN in the Cisco Wireless LAN Controller GUI? (Choose two)

A. management interface settings

B. QoS settings

C. Ip address of one or more access points

D. SSID

E. Profile name

D.   SSID
E.   Profile name

A network engineer must configure the router R1 GigabitEthernet1/1 interface to connect to the router R2 GigabitEthernet1/1 interface. For the configuration to be applied the engineer must compress the address 2001:0db8:0000:0000:0500:000a:400F:583B. Which command must be issued on the interface?

A. ipv6 address 2001:0db8::5: a: 4F 583B

B. ipv6 address 2001:db8::500:a:400F:583B

C. ipv6 address 2001 db8:0::500:a:4F:583B

D. ipv6 address 2001::db8:0000::500:a:400F:583B

B.   ipv6 address 2001:db8::500:a:400F:583B

With REST API, which standard HTTP header tells a server which media type is expected by the client?

A. Accept-Encoding: gzip. deflate

B. Accept-Patch: text/example; charset=utf-8

C. Content-Type: application/json; charset=utf-8

D. Accept: application/jsonjson

O.

D.   Accept: application/jsonjson

Explanation:

Accept header is a way for a client to specify the media type of the response content it is expecting and Content-type is a way to specify the media type of request being sent from the client to the server. http://www.java-allandsundry.com/2012/08/accept-header-vs-content-typeheader. html#:~:text=Accept-and-Content%2Dtype-are,the-client-to-t he-server

Refer to the exhibit.

Which action is expected from SW1 when the untagged frame is received on the
GigabitEthernet0/1 interface?

A. The frame is processed in VLAN 5.

B. The frame is processed in VLAN 11

C. The frame is processed in VLAN 1

D. The frame is dropped

A.   The frame is processed in VLAN 5.

Refer to the exhibit.

Shortly after SiteA was connected to SiteB over a new single-mode fiber path users at
SiteA report intermittent connectivity issues with applications hosted at SiteB What is the cause of the intermittent connectivity issue?

A. Interface errors are incrementing

B. An incorrect SFP media type was used at SiteA

C. High usage is causing high latency

D. The sites were connected with the wrong cable type

A.   Interface errors are incrementing

Page 38 out of 120 Pages
PreviousNext
141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061