Free Cisco 200-301 Practice Questions 2026 | Cisco Certified Network Associate

An administrator must secure the WLC from receiving spoofed association requests. Which steps must be taken to configure the WLC to restrict the requests and force the user to wait 10 ms to retry an association request?

A. Enable Security Association Teardown Protection and set the SA Query timeout to 10

B. Enable MAC filtering and set the SA Query timeout to 10

C. Enable 802.1x Layer 2 security and set me Comeback timer to 10

D. Enable the Protected Management Frame service and set the Comeback timer to 10

What makes Cisco DNA Center different from traditional network management applications and their management of networks?

A. It omits supports auto-discovery of network elements in a greenfield deployment.

B. It modular design allows someone to implement different versions to meet the specific needs of an organization

C. It abstracts policy from the actual device configuration

D. It does not support high availability of management functions when operating in cluster mode

Drag and drop the AAA terms from the left onto the description on the right.

Using direct sequence spread spectrum, which three 2.4-GHz channels are used to limit collisions?

A. 1,6,11

B. 1,5,10

C. 1,2,3

D. 5,6,7

Drag the descriptions of device management from the left onto the types of device
management on the right

What are two benefits of using the PortFast feature? (Choose two )

A. Enabled interfaces are automatically placed in listening state

B. Enabled interfaces come up and move to the forwarding state immediately

C. Enabled interfaces never generate topology change notifications.

D. Enabled interfaces that move to the learning state generate switch topology change notifications

E. Enabled interfaces wait 50 seconds before they move to the forwarding state

Refer to the exhibit.

What does the switch do as it receives the frame from Sales-4?<

A. Perform a lookup in the MAC address table and discard the frame due to a missing entry.

B. Insert the source MAC address and port into the forwarding table and forward the frame to Sales-1.

C. Map the Layer 2 MAC address to the Layer 3 IP address and forward the frame.

D. Flood the frame out of all ports except on the port where Sales-1 is connected.

A network engineer must create a diagram of a multivendor network. Which command must be configured on the Cisco devices so that the topology of the network can be mapped?

A. Device(Config)#lldp run

B. Device(Config)#cdp run

C. Device(Config-if)#cdp enable

D. Device(Config)#flow-sampler-map topology

Which two QoS tools provides congestion management? ( Choose two )

A. CAR

B. CBWFQ

C. PQ

D.

PBR

E. FRTS

Which plane is centralized by an SDN controller?

A. management-plane

B. control-plane

C. data-plane

D. services-plane