• 4.9/5.0
  • 1197 Questions
  • Updated on: 25-May-2026
  • Cisco Certified Network Associate
  • 211975 Prepared

Free Cisco 200-301 Practice Questions 2026 | Cisco Certified Network Associate


Topic 2, Exam B

Refer to the exhibit

Router R1 Fa0/0 is unable ping router R3 Fa0/1.
Which action must be taken in router R1 to help resolve the configuration issue?

A. set the default network as 20.20.20.0/24

B. set the default gateway as 20.20.20.2

C. configure a static route with Fa0/1 as the egress interface to reach the 20.20.20.0/24 network

D. configure a static route with 10.10.10.2 as the next hop to reach the 20.20.20.0/24 network

D.   configure a static route with 10.10.10.2 as the next hop to reach the 20.20.20.0/24 network

Refer to the exhibit.

What action establishes the OSPF neighbor relationship without forming an adjacency?

A. modify hello interval

B. modify process ID

C. modify priority

D. modify network type

A.   modify hello interval

Which protocol requires authentication to transfer a backup configuration file from a router to a remote server?

A. DTP

B. FTP

C. SMTP

D. TFTP

B.   FTP

Drag and drop the application protocols from the left onto the transport protocols that it uses on the right

An engineer configured an OSPF neighbor as a designated router. Which state verifies the designated router is in the proper mode?

A. Exchange

B. 2-way

C. Full

D. Init

C.   Full

What are two differences between optical-fiber cabling and copper cabling? (Choose two)

A. Light is transmitted through the core of the fiber

B. A BNC connector is used for fiber connections

C. The glass core component is encased in a cladding

D. Fiber connects to physical interfaces using Rj-45 connections

E. The data can pass through the cladding

A.   Light is transmitted through the core of the fiber
C.   The glass core component is encased in a cladding

An engineer needs to configure LLDP to send the port description time length value (TLV). What command sequence must be implemented?

A. switch(config-line)#IIdp port-description

B. switch(config)#IIdp port-description

C. switch(config-if)#IIdp port-description

D. switch#IIdp port-description

B.   switch(config)#IIdp port-description

Which mode must be set for APs to communicate to a Wireless LAN Controller using the Control and Provisioning of Wireless Access Points (CAPWAP) protocol?

A. bridge

B. route

C. autonomous

D. lightweight

D.   lightweight

When a client and server are not on the same physical network, which device is used to forward requests and replies between client and server for DHCP?

A. DHCP relay agent

B. DHCP server

C. DHCPDISCOVER

D. DHCPOFFER

A.   DHCP relay agent

Which two primary drivers support the need for network automation? (Choose two.)

A. Eliminating training needs

B. Increasing reliance on self-diagnostic and self-healing

C. Policy-derived provisioning of resources

D. Providing a ship entry point for resource provisioning

E. Reducing hardware footprint

C.   Policy-derived provisioning of resources
D.   Providing a ship entry point for resource provisioning

Page 40 out of 120 Pages
PreviousNext
161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263